Steel Clamp Jubilee Clamp Type

Steel Clamp Jubilee Clamp Type

50
KSh100
Skip to product information
Steel Clamp Jubilee Clamp Type

Steel Clamp Jubilee Clamp Type

A stainless steel adjustable hose clamp. The jubilee type has a smooth band and a single nut for tightening. Used to secure soft hoses onto rigid pipes.

KSh100
Size
  • Sizes: 50mm, 63mm, 90mm
  • 304 stainless steel, corrosion resistant
  • Smooth band protects the hose
  • Single nut adjustment
  • Bridge piece ensures 360 degree seal

Product Description

What It Does

A jubilee clamp wraps around a soft hose. The hose sits over a rigid pipe or barbed fitting. When you tighten the nut, the clamp compresses the hose against the pipe. The connection becomes watertight.

The clamp has a smooth inner band. It does not cut into the hose like some cheaper clamps. The bridge piece distributes pressure evenly around the whole circumference. You get a 360 degree seal.

Where to Use It

You are connecting a layflat hose to a pump outlet. Slide the clamp over the hose, push the hose onto the outlet, then tighten the clamp. The hose will not blow off under pressure.

Use the clamp on any soft hose. That includes layflat hose, rubber hose, PVC hose, and suction hose. It works for irrigation, water transfer, and even low pressure air.

The 304 stainless steel resists rust. You can leave it outdoors. It is suitable for marine environments, food processing, and chemical handling. It is a heavy duty clamp.

Installation

Open the clamp fully by turning the nut counter clockwise. Slide the clamp over the hose end. Push the hose onto the rigid pipe or barb. Position the clamp over the middle of the hose overlap. Not too close to the end, not too far back.

Tighten the nut with a screwdriver or a nut driver. Do not over tighten. Stop when the clamp is snug. If you see the hose bulging through the slots, you have gone too far.

The recommended torque is 18.5 Nm. That is about as tight as you can get with a short screwdriver by hand. If you use a long wrench, you can easily overdo it.

Related Products

Use this clamp with our Lay Flat Female Thread Coupling and Lay Flat Male Thread Coupling. It also works with our Rain Hose Male Coupling and Rain Hose Straight Coupling. For a different style, check our Steel Clamp Seal A.

Sizes

We have three sizes. 50mm, 63mm, and 90mm. These fit standard layflat hose and irrigation pipes. If you need a different size, ask us.

IrriHub provides reliable irrigation and farm systems for small and medium‑scale farmers across Kenya. For help choosing the right product for your farm, reach out to us directly. Call us: +254 729 717 881. Visit our store: Shubham Complex, Old Mombasa Rd.

You may also like