Product Description
Where You Use It
In a micro irrigation system, water flows through a network of 4/7 mm tubing. Every line needs a closed end, or water will just run out.
The end cap pushes onto the cut end of the tubing and blocks the opening. This keeps water inside the line so it only exits through the emitters or drippers you have installed.
How to Install
Cut the tubing end square with a sharp knife or tubing cutter. Push the end cap firmly onto the tubing until it seats fully. No glue, no clamps.
To remove, twist and pull. The cap can be reused on another line if you reconfigure the system.
Typical Setup
A main distribution line (often 16 mm or 13 mm) feeds several 4/7 mm drip lines. Each drip line has a tee at the start, a length of tubing, and an end cap at the far end.
Emitters or drippers are inserted along the line. The end cap makes sure every drop of water goes to the plants, not the ground.
IrriHub provides reliable irrigation and farm systems for small and medium‑scale farmers across Kenya. For help choosing the right product for your farm, reach out to us directly. Call us: +254 729 717 881. Visit our store: Shubham Complex, Old Mombasa Rd.