Product Description
What It’s Made For
PVC pressure pipes are designed to carry water under pressure from the source to the field. This particular pipe is 32mm in diameter, Class C (PN 10), meaning it handles typical irrigation operating pressures.
The smooth inner wall reduces friction, so pumps work less to move water. It is the same pipe used for mainlines, sub‑mains, and laterals in both drip and sprinkler systems.
Installation Options
The pipe ends are plain, intended for solvent weld connections using PVC cement. For longer runs, couplings join sections.
Where flexibility is needed, adaptors can connect to lay flat pipe or threaded components. In permanent installations, this pipe is buried or laid on the surface, secured with stakes where necessary.
Available Specification
Diameter: 32mm
Pressure Class: C (PN 10)
Length: 6 meters
Material: uPVC
Joint Type: Solvent weld
Handling and Use
Store pipe away from direct sunlight before installation to prevent surface degradation.
Cut with a fine‑tooth saw or PVC cutter, and remove burrs before gluing.
Clean the pipe end and socket with PVC cleaner or primer, then apply solvent cement.
Push the pipe fully into the fitting and hold for a few seconds. Allow joints to cure before pressurizing.
IrriHub provides reliable irrigation and farm systems for small and medium‑scale farmers across Kenya. For help choosing the right product for your farm, reach out to us directly. Call us: +254 729 717 881. Visit our store: Shubham Complex, Old Mombasa Rd.